A-TAK HEAVY DUTY SPRAY ADHESIVE

A-TAK is an exceptionally powerful adhesive designed for general upholstery applications, featuring the new market leading spray system which gives a medium fan spray pattern. It is most suitable for bonding foam to foam and to other materials such as fabrics, plastic, rubber, concrete or metal etc.
Also suitable for use with asbestos removal, dust sealing concrete floors etc.
Not suitable for headlinings – see Trimfix
500ml cans, 12 cans per pack

TRIMFIX

Perfect for vehicle trimming applications such as headlinings, door and panel trims, carpets etc. It exhibits high temperature resistance up to 70º and extreme flexibility. It is suited to bonding most materials to themselves and each other, including leather, fabric & felts, plastics and foam etc. Ideal for cars, coaches, caravans, boats etc.

CONTACT ADHESIVE

The first product from a new generation of synthetic rubber/resin adhesives. Its high solid/low solvent formula produces a quicker, stronger, more aggressive bonding system which out performs all conventional aerosol adhesives. It also has a high temperature resistance (80º) and is perfect for flooring, building industry, furniture industry, laminating, joinery, insulation and cars, coaches, caravans, boats etc.

HEAVY DUTY SPRAY ADHESIVE

(Non – Chlorinated)

This glue is a Non-Chlorinated version of our Heavy Duty Adhesive for use in the furniture, flooring and automotive industries.

SUPER FASTGRIP

Moisture curing polyurethane adhesive

A fast setting, high strength polyurethane adhesive suitable for a wide range of bonding applications. Suitable for both interior and exterior use and it bonds to most substances including concrete, metal, wood, plastic, rubber and hard foam. Ideal for applications where speed is beneficial ie in the carpet and flooring trade, for fitting carpet grippers, stair nosing and door strips or the building trade for fixing wall panels, skirting boards, dado rails etc.

FASTGRIP

Gap filling  adhesive

A high quality gunnable gap filling adhesive which is suitable for a wide range of bonding applications. Fastgrip bond dissimilar substances and is ideal for many building and shop fitting applications i.e. fixing metal supports to concrete, panels, boards and battens to concrete or brickwork, wooden floor panels onto beams, fixing stair nosing, doorstrips and carpet grippers. Fastgrip has an open time of approx. 10mins and is fully cured in 24 hrs.
380ml cartridges

PVA

Super Strong Adhesive
A multi purpose adhesive which dries clear, is water resistant and is ideal for all wood work both indoors and outdoors. It’s easily applied by brush, roller or spreader.

Available in the following sizes:
½ kg Bottle
1kg Bottle
5kg Container

Apollo A9331 Polyurethane Adhesive

A9331 is a moisture curing single part, polyurethane adhesive specifically designed for bonding wood to wood. It can also be used to bond many types of plastic foams and other insulating materials to a wide variety of both rigid and flexible facing materials. Such composites form structural  sandwich panels and insulated building boards and may be used in the manufacture of cold stores, caravans, mobile homes and offices, insulated building units etc.
A9331 has a short open time, which gives fast cure rates. The adhesive is applied by polybottle, scraper or trowel.  Packed in 1 ltr bottle.

Sprayable Adhesive

A8520: A8520 is a high solids, non-flammable, low pressure sprayable, synthetic rubber based adhesive designed primarily for applications in the foam conversion, upholstery and furniture industry.
A8520 exhibits fast drying characteristics, aggressive tack, a long bonding range, high strengths and provides an economical and efficient means of bonding non-structural components.
As well as being suitable for bonding foam to foam it is also recommended for bonding foam to metal, chipboard, hardboard, and GRP etc., and for the attachment of fabrics such as hessian, felt, polyester and other upholstery padding materials. It can also be used for bonding a wide range of insulation materials to metal ducting etc.

A8513: A8513 is a low solids, non-flammable, low pressure sprayable, synthetic rubber based primer / adhesive designed primarily for priming polyurethane foams prior to the application of adhesive tapes and films etc.
It can also be used as a conventional low solids sprayable adhesive.

A8513 exhibits fast drying characteristics, aggressive tack, a long bonding range, high strengths and provides an economical and efficient means of bonding non-structural components.
As well as being suitable for bonding foam to foam it is also recommended for bonding foam to metal, chipboard, hardboard, and GRP etc., and for the attachment of fabrics such as hessian, felt, polyester and other upholstery padding materials. It can also be used for bonding a wide range of insulation materials to metal ducting etc.

Both A8520 & A8513 are available in 5ltr & 20ltr drums.

Apollo A.66 Sprayable PVC Based Coating

Apollo A66 is a specially formulated PVC sprayable solution, which dries to give a tough, flexible, impervious coating.

It is normally used to provide a skin on flexible and rigid plastic foams (not polystyrene) which will seal against the ingress of liquids such as water, oil, petrol etc. Such covered foams may be used for furniture or bedding (where the resistance of A66 to detergents and antiseptics is advantageous), for sound deadening of motor vehicles (where diesel oil resistance is important),for wrestling mats, children’s play blocks etc. and ideal for boat cushions.

Fibrous materials such as fibreglass, mineral wool etc. maybe coated to prevent the nuisance of loose fibres and dust, and damaged asbestos lagging may also be sealed.

Spray Guns
Spray guns to suit both adhesive and A66 coating

Maxair: Gravity fed spray gun with pot

Glue Guns

Tacwise: Model 207 Hot Melt 30g per minute output, ideal for upholstery, packaging, carpet grippers, general assembly, woodwork etc.

Tec 175 - 130: Low melt 130degree, 400g per hour output.
Ideally suited for delicate fabrics (silks etc.), flower arranging, crafts etc.

Tec 175 - 190: Hot melt 190degree, 400g per hour output.
ideal for upholstery, packaging, carpet grippers, general assembly, woodwork etc.

Hot Melt Glue Sticks (12mm) are available in ½kg, 1kg, 5kg & 10kg boxes.
Also available is Polyamide hot melt suitable for electric cables.

Contact us for details

Click Here >

Click Here >